top of page
MATERIALS
Tesko Laser is able to cut a wide variety of materials, with particular specialization in mild steel, stainless steel, aluminum and brass. Our laser cutters are capable of cutting most metals with minimum thicknesses of .015" up to .625", and non-metallic materials from .030" up to 2.000" for wood. Refer to the table below for minimum and maximum thicknesses for specific materials.
Metals | Minimum Thickness | Maximum Thickness |
|---|---|---|
Tool Steel | .015" | .500" |
Titanium | .015" | .125" |
Stainless Steel (oxygen assist) | .015" | .375" |
Stainless Steel (nitrogen assist) | .015" | .500" |
Mild Steel | .015" | .625" |
Inconel | .015" | .375" |
Galvanized Steel | .015" | .250" |
Copper | .015" | .125" |
Brass | .015" | .187" |
Aluminum | .015" | .250" |
Non-metal Materials | Minimum Thickness | Maximum Thickness |
|---|---|---|
Wood | .030" | 2.000" |
Rubber | .030" | 1.000" |
Polycarbonate "Lexan" | .030" | .500" |
Plastic | .030" | 1.1250" |
Acrylics | .030" | 1.250" |
bottom of page